87 pregledanih proizvoda
Interchangeable SIMAGIC paddle modules for Zeus steering wheels (Zeus Formula, Zeus GT and Zeus Sport) – customise the shifter to suit your driving style. 2-paddle – symmetrical left and right paddles with return springs for natural and consistent GT gear changes 3-paddle – three independently assignable paddles for gear changes, clutch, DRS and full control customisation Push-Pull – bidirectional sequential operation that faithfully recreates the feel of a real shifter in a single compact paddle The modules are easily changed on Zeus steering wheels. Mapping and configuration via SimPro Manager V3.
Interchangeable rims for the SIMAGIC Zeus GT steering wheel. Cover different disciplines with a single wheel – just swap the rim. ZGT-320CD (Suede) – 320 mm classic D-shape, full suede, more legroom, classic GT style ZGT-320CD (Leather) – 320 mm classic D-shape, premium leather, ergonomic flat bottom, versatile ZGT-320MS (Suede) – 320 mm modern square GT shape, high-grip suede, aero design ZGT-320MS (Leather) – 320 mm modern square GT shape, fine-grain leather, professional profile ZGT-300CD (Suede) – 300 mm classic D-shape, suede, compact and agile, vintage GT feel ZGT-300CD (Leather) – 300 mm classic D-shape, premium leather, compact ergonomics, precise input ZGT-300MC (Rubber) – 300 mm modern open-top, injection-molded rubber, maximum durability ZGT-300MC (Suede) – 300 mm modern open-top, professional suede, unobstructed view of the dash, formula style Compatible exclusively with the SIMAGIC Zeus GT steering wheel.
Interchangeable rims for the SIMAGIC Zeus Sport steering wheel. Customize the wheel for your discipline – GT, formula, rally, or drift. ZS-310CS (Suede) – 310 mm GT square shape, suede grip, lightweight aluminum frame, for GT and formula ZS-310CS (Leather) – 310 mm GT square shape, premium leather, high durability, for endurance racing ZS-320CD (Suede) – 320 mm D-shape, suede grip, flat bottom for more legroom, versatile ZS-320CD (Leather) – 320 mm D-shape, premium leather, ergonomic and versatile ZS-330RR (Suede) – 330 mm round, full suede, non-slip, for rally and drift ZS-330RR (Leather) – 330 mm round, classic leather, authentic rally feel Compatible exclusively with the SIMAGIC Zeus Sport steering wheel.
The PXN A7 is a standalone H-shifter for PC and supported PXN steering wheels, featuring six forward gears and reverse.Connectivity and Compatibility Direct USB connection to a PC running Windows 7/8/10/11. The game on PC must support standalone controllers; the shifter is then mapped in the game settings. Connection to the PXN V9/V10 using the appropriate cable and following the manufacturer's instructions is supported. The USB connection does not allow the shifter to be used on its own directly with a PlayStation, Xbox, or Switch console. Support via a steering wheel depends on the wheel, platform, and game.Package ContentsA7 shifter and included connection cables. The steering wheel and pedals are sold separately.Official A7 Instructions
PXN two-mode gearbox (H + sequential)The PXN SF SH dual-mode gearbox is designed for driving simulation fans who want maximum realism and precision. The unit allows you to switch between H-pattern mode (8 gears + reverse) and sequential mode, so you can adjust your driving style to your favorite game and your own preferences. Robust metal construction and adjustable shift force ensure durability and full control during dynamic racing.Dual mode operationThe mode switch allows you to quickly change the way the lever works. In H-pattern mode you have up to 8 gears plus reverse, which is great for road and rally car simulations. Sequential mode, on the other hand, provides fast, linear gear shifts, ideal for track racing.Adjustable shift forceThanks to the adjustment screw, you can adjust the resistance of the lever to your preference. Simply use the included allen wrench to increase or decrease the force needed to shift gears. This guarantees an even more realistic experience and full control.Stable mounting and high compatibilityThe gearbox can be securely mounted to the simracing stand with allen screws. The unit works with a PC running Windows 7/8/10/11 and PXN bases, connecting via USB-C. This makes setup quick and hassle-free.Included: Two-mode gearbox USB-C to USB-A cable USB-C to USB-C cable RJ11 to RJ11 cable Gear shift knob Wrench M5 Hex bolts ×4 TM5×15 Allen screws ×4 Allen wrench Manufacturer PXN Model SF SH Connection method wired USB power supply 5V Current consumption 50 mA max Dimensions approx. 175 × 257 × 105 mm Weight approx. 2320 g Operating temperature range 10 to 40°C Working humidity 20 to 80%
PXN gearbox - H layout 7+1The PXN SF U gearbox in H layout (7 gears + reverse) will delight driving simulator enthusiasts who expect the most realistic experience. The precise gear mechanism, solid metal construction, and intuitive connection to a PC or PXN base make every gear change feel like driving a real sports car.Driving realism at its bestWith up to seven gear ratios and a dedicated reverse gear, you can replicate road and rally driving with the utmost accuracy. This is ideal for drivers who want to bring their gaming experience as close as possible to real-world driving.Stability that gives you the edgeThe gearbox can be securely attached to the sim racing stand using the included Allen screws. The unit connects to a computer or PXN base using a USB-C cable, ensuring seamless installation and immediate operation.Built for intensive drivingThe PXN SF U is made from high-quality materials, and its weight of more than 1.5 kg ensures stability even during the most dynamic sessions. The housing is designed for intensive use and will meet the demands of any fan of realistic racing.Included: Gearbox Gear shift knob USB-C to USB-A cable USB-C to USB-C cable RJ11 to RJ11 cable Hex nut (M5) ×4 Allen screw (TM5×15) ×4 Wrench Allen wrench Manufacturer PXN Model SF U Connection method wired USB power supply 5 V Current consumption 50 mA max Dimensions approx. 172 × 107 × 231 mm Weight approx. 1550 g Operating temperature range 10 to 40°C Operating humidity 20 to 80%
PXN Sequential TransmissionThe PXN SF SMG is a sequential gearbox created for simulator fans who want maximum immersion and precise control. Robust metal construction and an ergonomic stick provide strength and a stable grip, while compatibility with PXN bases and PCs guarantees versatile use in racing and simulation games.Smooth and precise gear shiftingThe gearbox uses a sequential mechanism, which allows you to switch gear ratios instantly - just one push of the stick up or down. This makes every maneuver fast, smooth and natural, increasing driving realism and improving performance on the track.Robust construction for long lifeA housing made of sturdy materials and a stable base ensure reliability even under heavy use. With metal components and a high-quality finish, the PXN SF SMG will meet the demands of both amateur and professional simulation enthusiasts.Easy installation and wide compatibilityYou will connect the device quickly thanks to the USB-C interface. The gearbox works with Windows 7/8/10/11 PCs and PXN steering wheel bases, allowing you to easily incorporate it into your existing setup.Included: PXN SF SMG gearbox Gear shift knob (mounted separately) USB-C to USB-A cable USB-C to USB-C cable RJ11 to RJ11 cable Mounting screw set (M6 + TM6x15) Allen wrench and wrench User manual Manufacturer PXN Model SF SMG Connection method Wired USB power supply 5 V Current consumption Max. 50 mA Product dimensions Approx. 195 × 52 × 325 mm Weight Approx. 1050 g Operating temperature From 10 to 40°C Operating humidity From 20 to 80% Compatible platforms PC (Windows 7/8/10/11), PXN bases
PXN-H BS HandbrakePrecise control and a realistic driving experience at your fingertips. The PXN-H BS handbrake is equipped with a high-precision 16-bit sensor that ensures accurate and smooth reproduction of every movement. The sturdy aluminum construction and compact dimensions (approx. 313 × 178 × 46 mm) make the device durable yet easy to install. Furthermore, USB power delivery ensures stable, lag-free performance, and the plug-and-play system speeds up the connection process.Aluminum Construction and DurabilityThe handbrake features a reinforced construction, allowing it to withstand heavy use and long gaming sessions. The use of an aluminum alloy ensures high resistance to pressure and wear. Additionally, this material offers low susceptibility to corrosion, contributing to the device’s long lifespan and helping it maintain its aesthetic appearance over time.Precision sensorThe built-in 16-bit magnetic encoder ensures accurate and stable signal transmission. The contactless design enhances smooth operation and reduces mechanical wear, resulting in greater durability and repeatability of every movement. This gives you full control over braking in dynamic track situations!AdjustabilityThe replaceable spring and damping system allows you to adjust the resistance and response speed. This solution makes the device better mimic natural hand movement and increases comfort of use. Thanks to this, you can easily adjust the brake’s performance to your own preferences!Two operating modes – vertical and horizontalThe PXN-HB S offers the option to operate in vertical or horizontal mode. The vertical setting provides an experience similar to that of rally cars, while the horizontal setting resembles classic solutions used in road cars. Adjust the configuration to your favorite driving style and game type!Simple installation and wide compatibilityThe brake uses a USB interface and operates in plug-and-play mode, meaning quick connection without the need to install drivers. It is compatible with Windows 7, 8, 10, and 11, and works seamlessly with popular games such as Assetto Corsa, Need for Speed, Euro Truck Simulator 2, and Forza Horizon 5. Additionally, the dedicated PXN software allows you to configure functions and assign buttons according to your needs.Included Handbrake x1 Mounting bracket x1 Spring x1 Silencer x1 USB-B cable x1 Flathead screwdriver x2 M3 Allen key x1 M5 Allen screws x4 M5 Allen wrench x1 Manufacturer PXN Model PXN HB S Material Aluminum alloy Mounting holes M5 screws Connection type Wired Operating voltage USB power supply: 5 V Operating current USB operating current: 50 mA Weight Approx. 900 g Dimensions Approx. 313 × 178 × 46 mm Compatibility Windows 7/8/10/11
PXN Z D1 Handbrake MountThe PXN Z D1 is a sturdy desk mount designed for installing a handbrake. It is made of durable carbon steel, making it highly durable and resistant to damage. The design, measuring approximately 165 × 108 × 4 mm, provides stable support, and the dual-clamp system ensures a secure mount even during heavy use. The mount is compatible with select PXN accessories, and its mounting holes are specifically positioned for the HBS hand brake.Stability and durability of the constructionThe use of carbon steel and precision CNC machining result in high resistance to deformation and wear. The mount is designed to withstand heavy loads and the pressure generated during dynamic driving. Additionally, the use of a dual mounting system (on the left and right sides) increases stability and prevents the product from shifting.Surface fit and protectionThe mount is equipped with EVA cushioning pads that protect your desk or table from scratches and improve grip. The clamps are compatible with tabletops up to 7 cm thick, allowing for wide application in various gaming setups. Furthermore, precisely positioned mounting holes enable accurate alignment of the device.Thoughtful design and easy installationThe mount’s design prioritizes ease of installation and secure attachment of accessories. The included mounting hardware allows you to quickly set up your workstation, and the compact design facilitates space organization. This is a practical solution for those who want to create a stable and functional setup for driving simulators.Included Mount Clamps x2 Mounting accessory set Manufacturer PXN Model Z D1 Material Carbon steel Manufacturing technology CNC Compatibility PXN handbrakes (specifically HBS) Maximum tabletop thickness 7 cm Mount dimensions Approx. 165 × 108 × 4 mm Clamp dimensions Approx. 35 × 82 × 115 mm (after tightening the screws) Weight 1750 g Color Black
PXN Z ES ButtonEnsure full control and safety while driving with the PXN Z ES emergency button. The device allows you to cut off the power supply instantly with a single press, enabling a quick response in critical situations. It also features a sturdy aluminum housing, compact dimensions of approximately 81 × 52 × 50 mm, and a stable wired connection via an RJ11 cable. The button is compatible with PXN steering wheel bases from the VD and V10 Pro/Ultra series.Instant power cutThe One-press Power Cut feature allows you to instantly stop the device with a single motion. This solution enhances safety and provides greater confidence during intense driving. It is particularly effective in dynamic situations where a quick reaction is crucial. To restart the system, simply turn the button to the right. The Safe Reset mechanism prevents accidental activation and allows you to consciously restore power. This gives you full control over the device’s operation!Durable aluminum constructionThe aluminum alloy housing ensures high resistance to damage and corrosion. The robust construction withstands heavy use while maintaining an aesthetic appearance. This solution works well in both home setups and more complex simulation rigs.Flexible mounting optionsThe button offers two installation methods—using an EVA pad or screws. This allows you to adapt the mounting method to your setup and ensure the device is securely positioned. It’s a convenient solution that facilitates integration with various configurations.Included Z ES Button x1 3 mm Allen key x1 TM5×14 mm screws x4 M5 nuts x5 EVA pads x5 Manufacturer PXN Model Z ES Connection type RJ11 cable Cable length 165 cm Operating voltage 3.3 V Product dimensions Approx. 81 × 52 × 50 mm Weight Approx. 164 g
Control Box Button Panel PXN CB1The PXN CB1 Button Panel is a practical addition to your simulation gaming kit, allowing for an even more realistic representation of driving a truck or rally car. The device works with many popular titles such as Euro Truck Simulator 2, American Truck Simulator and Dirt Rally 2.0, giving the player more control over the vehicle and making it easier to operate additional functions. In addition, the PXN CB1 supports RGB backlighting with the ability to change colors and lighting effects. This not only makes the panel easier to operate in the dark, but also allows you to create your own atmosphere while playing.30 programmable buttonsThe PXN CB1 is equipped with 30 buttons that can be freely assigned to different functions in the game. This makes it possible to control the turn signals, windshield wipers, cruise control or horn in a manner similar to real driving conditions. This solution makes the gameplay more natural and intuitive.Various types of switchesThe panel offers several types of switches - from classic buttons to metal levers to rotary dials. There is also a special engine start button and a lever with a cover, which introduce additional realism when starting the vehicle. Components made of metal provide good conductivity and wear resistance.Refined designThe housing is made of industrial ABS plastic, which is characterized by high resistance to wear, low temperatures and mechanical damage. In addition, the material is durable and recyclable. On the back of the case there is a power switch and a USB-C port for connecting the device. Thanks to the simple Plug & Play solution, the panel is ready for use immediately after installation, without complicated configuration.Flexible mounting optionsThe PXN CB1 panel can be easily mounted on a desk using the included clamps - it supports tabletops up to 70 mm thick. This convenient solution ensures stability even during intense gaming. In addition to desktop mounting, the CB1 also offers the option of mounting on special stands or brackets compatible with the mounting holes. This allows each gamer to adjust the position of the panel to his/her stand, increasing comfort and ergonomics.Included CB1 panel USB to USB-C cable USB-C to USB-C cable Clamp M5 screw x3 Hexagonal wrench Manufacturer PXN Model CB1 Connection wired Operating voltage 5V Operating current 300 mA Dimensions 184 x 144 x 78.5 mm Weight 540 g Operating temperature 10~40°C Operating humidity 20~80%
The PXN N7 is an adapter for using select PXN steering wheel devices on the PlayStation 5 console.Compatibility check before purchaseSupport depends on the exact model and version of the steering wheel, firmware, operating mode, and game you wish to use. Before ordering, contact us to check your combination of device and game.Do not assume that the adapter enables all functions of the steering wheel and accessories on the console. Check force feedback, shifter, clutch, and other peripherals in particular.Package contentsThe offer is for the N7 adapter. The steering wheel, console, and other equipment are not included.
You must enter at least 2 characters.
